How to build a retaining wall on a steep hill

how to build a retaining wall on a steep hill

How To Build Retaining Walls on Slopes – 10 Simple Steps

Insert wood stakes to mark the boundaries of the first retaining wall at the base of the slope. Create an outline to follow by tying off one long string around the top of each stake. Step 2 Dig out vegetation and dirt from the base of the slope with a flat shovel and pile it in a nearby tarp. Firstly, it is an inclination – it should be facing up to the slope at least degrees. It needs to be put in the process of formwork installation – if a wall is made of stone, you will need to place it at an angle. Secondly, the reinforcement – a framework of reinforcement should be placed inside the formwork.

In this article we will deal with subtleties and nuances of the problem how to build a retaining wall on a slope? The main problems retsining suburban areas with a slope are landslides and washout of fertile soil in the process of snow melting and raining.

It is fraught with unpleasant consequences not only for the plot, but also for structures located there. To prevent all this, you can use so-called retaining wall — an obstacle that can restrain the soil motions, even walo your construction is located on a slope. Such a construction is just a thick barrier going with its base deep in the soil. This is an artificial terrace or step cascade of them, each element of which holds a certain soil portion.

This barrier can be made of various materials. In fact everything that is able to hold fast the soil may suit here. This technology has a number of good materials that have shown their best sides. A retaining wall works quite simple. The only condition for its high-quality and long-term work is its base at the slope foot. That is why the construction of terraces due to a retaining wall begins from the bottom of the slope — first, a retaining wall is placed, ob up the hill a second wall is mounted, which base goes below the upper part of the previous wall retainihg at least 40 inches, then the third one, the fourth one and so on.

Together, several barriers form a high retaining wall construction, the purpose of which is keeping the soil on a slope. As mentioned above, during the operation of these products what is social criticism definition could identify a number of materials that have shown themselves from the best side — constructions of which serve for quite long period and show excellent job with their duties to deter landslides.

Such materials are stones and concrete. Alternatively, you can use bricks, but under natural conditions without hilll protection of the water action and frost influence, they are quickly destroyed.

So, for better understanding the solution of question how to build a retaining wall on a slopewe will divide its structure into three main components, which should be built step by step:. Save my name, email, and website in this browser for the next time I comment. How to build a house » Walls » Subtleties and nuances of how to build a retaining wall on a slope.

Related posts: Hos nuances of how to build a cinder block wall The easiest way of building a no block wall with your own hands How to build a basement wall for the house being erected How to build a gabion stepe for your garden in a proper way How to build a plasterboard false wall how to save imovie video. Leave a Reply Cancel reply Your email address will not be retaiming.

Comment Name Email Website Save my name, email, and website in this browser for the next time I comment. Steepp use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you builf happy with it.

Ok Privacy policy.

Build a Retaining Wall on Slope

Building the Retaining Wall. We planned the wall to curve around a citrus tree on the slope. First, the bottom row of a retaining wall has to be buried to give the wall support. We dug a trench for the deepest part of the wall. The trench had to be deep enough to fit . Apr 01,  · Building a retaining wall that “steps up” the slope is an easy way to create more usable space and enhance the look and feel of your landscape. In this video Author: Allan Block. Dec 04,  · freedatingloves.com freedatingloves.com?hl=enFacebook freedatingloves.com Author: West Coast Custom Concrete.

Retaining walls are used to keep dirt and water from eroding away. A retaining wall will usually slope slightly to one side to aid drainage and relieve some of the pressure on the wall by water and overly saturated soil. Most walls are built to improve the look of a yard and serve as a function such as creating a garden area or play area.

Sometimes, retaining walls must be built on a slope and therefore special features must be built in to keep the wall sturdy and long-lasting. The process to build a retaining wall on slope can be divided into 10 steps to understand easily. The steps are described below. Layout the concrete stones that will be used where the wall will be built. Use the stones as a guide to spray paint lines on the ground. Put one line about eight inches behind the stones and the other line about three inches in front of the stones.

After painting, move the stones aside until it is time to place them permanently. Dig a trench between the spray painted lines. The trench should be 12 inches deep. When working with a slope, start by digging at the lowest point of the slope until you reach 12 inches deep. As the trench is dug going up-hill toward the highest point, the trench will be deeper here.

The trench at the highest point will not have a set depth as it must be equal to the lowest point. In other words, when the trench is poured it will be level. Be sure to rake out the soil from digging the trench and tamp it down. Add crushed limestone to the trench about three inches deep. This will enable proper drainage of the wall and will keep the wall from shifting or having excessive water pushing on it. Rake the crushed limestone until it is level then pour another three inches of crushed limestone.

Rake and tamp down the second layer of limestone. Now it is time to start placing the stones or pavers. Place the first one in the trench at one end. Check with a level to ensure that the stone is level in the trench. Tap the stone with a rubber mallet is it is uneven. Keep checking and tapping until it is level.

Place the second stone next to the first one. This time, put the level across both stones and then tap down the second stone until it is level with the first one. If the stone happens to be lower than the first stone, then rake some crushed limestone underneath it to level it out with the first one. Repeat this technique until the base of the walls is completed. After laying the base row of the retaining wall add some crushed limestone in the trench behind the stones. Make sure to slope the crushed limestone toward the area where the water will drain.

The slope should be around one inch per feet long. Using landscaping fabric, cover the crushed limestone that was placed behind the stones.

Then cover the landscaping fabric with drainage aggregate about one inch thick. Add drain tile on top of the drainage aggregate and cover with landscaping fabric. The drain tile should be centered between the stones and the back of the trench.

Using a wet saw, cut a stone in half then apply a thick bead of masonry adhesive to the top one of the stones in the base row. One of the halves will be placed on top of the masonry adhesive.

By doing this, the next row will be staggered. The staggering of the stones will enable the wall to be more sturdy and stable. Once the second row is started with the half stone, begin placing the stones in the row using masonry adhesive between the two rows. Remember to use a level to make sure that the rows are remaining level. Tap down with a rubber mallet to level the stones.

The other half of the cut stone will be used once you reach the end of the row. Lay a third row using whole stones so that the rows remain staggered. Complete the wall using this technique of staggering the stones until it reaches the desired height.

Once the wall is completed, put drainage aggregate behind the stones until it is about two inches below the top of the wall. Cover the drainage aggregate with landscaping fabric.

Use dirt to backfill the gap between the front of the trench and the stones. Tamp the dirt down to keep the base stones from shifting. Then add dirt to cover the landscaping fabric that is behind the wall. Then landscape the area behind the wall with grass or sod and then plant flowers or other plants.

1 thoughts on “How to build a retaining wall on a steep hill

Add a comment

Your email will not be published. Required fields are marked *